● 8 September 2022 ● All members

International Workshop on Re-using Robot Data

International Workshop on Re-ssing Robot Data. Re-using robot data is key to a lot of challenges! However, the potential of re-using robot data is not realised yet due to scientific, technical and IPR issues. This workshop addresses this.

Do you want to make more out of your robot applications?
Do you want to predict failures of your system before they occur?
Do you want to use data in your production to improve quality inspection?
Are you tired of always starting from scratch when you establish new robot solutions?
Do you want to exploit information about trajectories, grippers and cameras from already existing robot set-ups to speed up the development of new robot solutions?
Do you want to apply already established control strategies by adapting those to a new problem?

Re-Using robot data is key to these challenges!

However, the potential of re-using robot data is not realized yet due to scientific, technical and IPR issues. The ReRoPro project, Re-Use of Robotic-data in Production through search, simulation and learning aims at addressing this problem.

We invite for tasks such as predictive maintenance, speeding-up the establishment of new assembly solutions and fine-tuning of critical components of your production.

At the workshop, we will discuss the needs of industry, current solutions and the scientific and technical challenges that are connected to the problem of an efficient re-use of robot data.

Find out how to make efficient use of your robot data!

09:30
Welcome with coffee and rolls in the lobby
10:00
Welcome and Introduction
Prof. Norbert Krüger, University of Southern Denmark, coordinator of the ReRoPro-project
10:15
Session 1: The ReRoPro Project
10:15
The i4.0 use case and current software solution
Assoc. Prof. Aljaz Kramberger, University of Southern Denmark
10:30
Data sensitivity issues in data re-use
Prof. Mikkel Baun Kjærgaard, University of Southern Denmark
10:45
Differential simulators, digital twins & data (d^3)
Prof. Kenny Erleben, University of Copenhagen
11:00
Data-reuse in machine learning and planning
Assoc. Professor Andres Masegosa, Aalborg University and Assoc. Professor Alvaro Torralba, Aalborg University
11:15
Coffee Break
11:30
Session 2: Data-Re-Use in Industry and Science
11:30
Examples of industrial robot applications, where data could have been re-used
Prof. Henrik G. Petersen, University of Southern Denmark, MADE
11:50
The Danish robot ecosystem and the re-use of data
Project Manager Søren Adamsen Mouritzen, Odense Robotics
12:05
Paving the way for a Cambrian explosion in robotics: open knowledge services for robotics applications
Prof. Michael Beetz, University of Bremen
12:45
Lunch break
13:30
Session 3: Industrial perspectives
13:30
Data in Pharmaceutical Device Manufacturing
Senior Assembly Engineer, Roger de Reus, Novo Nordisk
13:45
Robots and Sensors in Surface Treatment Applications
Head of R&D Lars Kristian Feddersen, Nordbo Robotics
14:00
Re-use of data in CAM programming
Head of Production Bo Schmidt, WellTec and Head of Digital Integration CNC Thomas Hyllen, WellTec
14:15
Factory of the Future
Program Director Alex Severin, Rockwool
14:30
Coffee Break
15:00
So we got big data – now what?
Chief Commercial Officer Anders Meister, CIM.AS
15:20
Toward a Knowledge-Based Data Backbone for Seamless Digital Engineering in Smart Factories
Dr. Markus Rickert, Technische Universität München
15:50
Round Table discussion
16:30
Concluding remarks